ACT-31DH

1-Channel Factory Block Coded Key Ring Trans & HI

The Model ACT-31DH is a 1-Channel Factory Block Coded Key Ring TRANS PROX Transmitter & 26-bit Wiegand HID-Compatible Proximity Tag designed for use with Nice/Linear’s access control products. The Model ACT-31DH is supplied with a quick-disconnect key ring and also includes lithium batteries which are rated for a five-year service life. The TRANS PROX’ unique 10-second time-out feature prevents the device from transmitting continously, unlike other transmitters that can shut down an access system if they are stuck in the transmit mode.

The ACT-31DH also contains a 26-bit Wiegand HID-Compatible proximity tag programmed to the same block code as the transmitter. The tag is compatible with Nice/Linear’s Model AM-DPR Proximity Reader. Waving the transmitter near the reader will request access from the system.

The transmitter utilizes Nice/Linear’s renowned MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver “learns” each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Nice/Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.



Part Number: ACP00957 

Description

The Model ACT-31DH is a 1-Channel Factory Block Coded Key Ring TRANS PROX Transmitter & 26-bit Wiegand HID-Compatible Proximity Tag designed for use with Nice/Linear’s access control products. The Model ACT-31DH is supplied with a quick-disconnect key ring and also includes lithium batteries which are rated for a five-year service life. The TRANS PROX’ unique 10-second time-out feature prevents the device from transmitting continously, unlike other transmitters that can shut down an access system if they are stuck in the transmit mode.

The ACT-31DH also contains a 26-bit Wiegand HID-Compatible proximity tag programmed to the same block code as the transmitter. The tag is compatible with Nice/Linear’s Model AM-DPR Proximity Reader. Waving the transmitter near the reader will request access from the system.

The transmitter utilizes Nice/Linear’s renowned MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver “learns” each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.

Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Nice/Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.



Part Number: ACP00957 

Features

Compatible with all Nice/Linear access receivers and controllers Built-in 26-bit Wiegand interoperable with certain HID® 125-kHz proximity card formats, proximity tag Eliminates the need for a separate proximity card or tag and transmitter Supplied with a convenient quick-disconnect key ring Pre-programmed with the same facility and ID codes for transmitter and proximity tag Sold in lots of 10 Power: Two 2016 batteries Codes: Factory block coded in MegaCode format RF frequency: 318 MHz Dimensions: 1.25″ W x 2.25″ H x .48″ D Order number: ACP00957

Resources